Adaptive Back-Propagation algorithm with magnified error signals;

一種基于放大誤差信號的自適應BP算法

Back-propagation algorithm based on enlarging error signals;

基于放大誤差信號的BP算法

The algorithm utilizes the correlation of output error signal to adjust the step size,solves the inconsistency problem of misadjustment and convergence time,and allows more flexibility in using.

該算法利用誤差信號的相關值去調節步長,解決了算法收斂時間與穩態誤差間的矛盾,為實際應用提供了更大的靈活性。

This model is used to generate a residual signal by comparing the healthy signal and the signal in the running system.

利用這個模型，通過比較健康信號和系統實際產生的信號，產生一個殘差信號，并對殘差信號進行適當處理，從初始故障到嚴重故障，可以有效地得到監測。

A new residual signal spectrum analysis and statistics analysis method is proposed after wave- let packet denosing.

在小波包降噪的基礎上,提出了一種對小波包降噪后的殘差信號進行頻譜分析和統計分析的新方法,該方法首先對原始振動信號進行小波包降噪,然后根據降噪后的振動信號和原始振動相比的差值提取殘差信號,最后通過對殘差信號進行頻譜分析提取產生噪聲信號的特征頻率,通過對殘差信號的統計量分析判斷設備運行狀況。

An polarization matching experiment on pulsed CO 2 laser heterodyne signal is designed.

設計了一個CO2 激光脈沖外差中的脈沖信號光和連續本振光偏振匹配研究實驗 ,從理論和實驗上 ,分析了偏振態匹配程度對脈沖外差信號的影響 ,當兩束光嚴重失配時 ,不僅降低脈沖外差效率 ,而且還將導致激光脈沖畸變 ,產生很強的連續波外差背景噪聲 ,抑制脈寬內外差信

Through size-research of the colour difference signals in colour TV-test illustrating picture, the phase and module of colour difference signals call be obtained simutaniously.

用插值法對彩色電視廣播測試圖中的色差信號進行定量研究，可以同時得到色差信號的相位和模。