In addition,a superior approach for measuring vehicular velocity is contrived,which solves the difficulty in verifying the acc.

同時提出了先進的車身速度驗證測試方法,解決了GPS速度參數的驗證測試難題。

In order to enhance the accuracy and overcome the limitation of representing the vehicular velocity with non driving wheel speed signals, which is commonly used in researching on automotive dynamic control systems at present, the dynamic and kinematics models of running vehicles and wheels are established.

為了改進目前在汽車動力學控制系統研究中常用的由車輛的非驅動輪速獲得車身速度的計算方法的局限性和精確性 ,通過建立行駛車輛及車輪部分的動力學及運動學模型 ,推導并提出了基于驅動輪速信號帶可調整加權因子的車身速度算法 。

Study on Body Fatigue Bench Test Method;

白車身強度臺架試驗方法及疲勞壽命的研究

Study on Stiffness and Strength of Non-Integated Type Body and Frame of SUV Model NHQ6470;

NHQ6470型SUV非承載式車身車架剛度強度的研究

Finite Element Analysis for Strength and Stiffness of Bus-body Frame

客車車身骨架強度與剛度的有限元分析

Static Strength Analysis and Lightweight Research of Bus Body Frame;

客車車身骨架的靜強度分析與輕量化研究

The Simulation of the Front of Body Structure Static Strength Analysis and Dynamic Analysis;

轎車前部車身結構靜態強度計算及動態分析

Analysis of Strength of Whole Bus Frame and Local Stress Concentration;

客車車身整體骨架強度與局部應力集中分析

Study on the Strength Optimization of Coach Body's Structure Based on Finite Element

基于有限元分析的大客車車身結構強度優化

The Finite Element Analysis on Strength, Stiffness and Fatigue Character of Automobile Body s Die;

車身模具強度剛度及疲勞性的有限元分析

Research on the Influence of Spot Pitch on the Static Strength and Fatigue Strength of Body Structure Member;

焊點間距對車身構件靜強度和疲勞強度的影響研究

Craft Study on CO_2 Laser Welding of Zinc Coated High Strength Steel;

車身用高強度鍍鋅鋼CO_2激光焊接的工藝研究

Analysis of Strength Match for T-Welded Joints in Al-Alloy Car Body Structure

鋁合金車身骨架結構T型接頭匹配強度分析

Random Vibration and Fatigue Strength Analysis of Bus Skeleton for Army;

軍用客車車身骨架結構隨機振動特性與疲勞強度分析

Based on the model, the strength, stiffness and modal analyses are performed for 4 typical working conditions.

并對車身結構進行4種典型工況下的強度、剛度以及模態分析。

Recovery Day: A positive way to recover after intensive training.

恢復日：大強度訓練后的積極恢復，促進身體健康的單車訓練項目。

A Study on the Matching Law of High Strength Steel Sheets for Car-body Front-end Structures Based on Frontal Impact Requirements

正面碰撞下車身前端結構高強度鋼板匹配規律研究

The result is a spaceframe chassis that makes the Phantom Drophead Coupé perhaps the most rigid convertible available today.

結果表明，在當今的敞篷車中，幻影軟頂敞篷車的車身底盤強度最為出色。

torsional stiffness graph

扭轉剛度圖 -車身的

Strength Analysis on the Head-car Body of CRH_2;

CRH_2動車組頭車車體結構強度研究